TRITON AUDIO FetHead Phantom In-Line Microphone Preamp

Price: $79.95 - $58.20
(as of Dec 16, 2023 14:16:22 UTC – Details)

Product Description

Operation

Your Fethead Phantom will latch straight onto any XLR equipped microphone, or anywhere else in the signal path between microphone and preamp/mixer. The electronics are housed in a robust metal chassis with a balanced female XLR input and a balanced male XLR output, rugged enough for use at home, in the studio or on tour.

Allows phantom power to reach the microphone Adds 18dB of clean gain Great for mobile recording and camera microphones

Triton Audio FetHead Phantom

Preamp for condenser microphones

FetHead Phantom is an ultra-low noise, high quality, in-line microphone preamplifier. It provides improved sound for condenser microphones. Small, compact, but powerful, Fethead Phantom utilizes tried and true FET technology to deliver up to 18dB of clean boost. No more cranking your mic preamp and adding unwanted noise to get your microphone to an acceptable volume. Boost your microphone!

Preamp for condenser microphones Low noise Class A FET amplifier 18 dB amplification (@3000 Ohm load) Lots of headroom Frequency response 30hz-100khz (+/- 1dB) Z-in 1000 Ω Circuit is powered with 24-48V phantom power

Which microphones benefit

FetHead Phantom is specially designed for condenser microphones. It works very well with all condenser microphones. FetHead Phantom is also an indispensable tool for mobile recording and a real upgrade for camera microphone preamps, because it lowers the noise floor.

Phantom power distribution

FetHead’s Phantom circuit uses 48V phantom power but also passes it on from its input to the microphone. Your condenser mic is powered with the same phantom power.

Recommended applications

Our FetHead Phantom is recommended for improving the signal to noise ratio and performance in the following situations:

Recording direct into a DAW interfaceNoisy or low gain preampsMixers/preamps that negatively impact the sound at higher gain settingHandheld digital audio recordersCondenser microphonesMiking all types of softer sound sources

Amplification de 27 dB (@ charge de 3000 Ω)
Balanced XLR input/output
Frequency response 10hz-100kHz (+/- 1dB)
The circuit is powered by 24-48V phantom power
Note: 1.The information that P24 or P48 is required is present. 2.A FetHead will work with all types of dynamic balanced microphones 3.A FetHead can be applied to either end of the mic cable, apply where best suited